The Ghost Immobiliser
Immobilisers are a powerful tool to fight vehicle theft. They prevent the vehicle from starting if it isn't equipped with an identification card. They also help to stop hotwiring or other traditional forms of vehicle theft. Modern methods such as relay theft or key cloning are becoming increasingly common.
The Ghost Immobiliser is designed to fight these trends and make your vehicle unnoticeable. It doesn't use LED indications radio signals, key fobs, and is quiet and stealthy.
Easy to install
The Ghost Immobiliser is a revolutionary device, connects with the CAN data network of your vehicle to prevent key cloning or theft. It is a TASSA-approved device, and insurance companies endorse it. It operates silently and is virtually unnoticeable to thieves. It uses buttons in your steering wheel, centre console, and door panels to create an individual pin code sequence that has to be entered before you are able to start your car. You can create up to 20 different sequences to increase security. The system is easy to install and doesn't require any additional hardware.
To ensure the highest quality outcomes it is recommended you select a reputable CAN immobiliser installer who is specialized in your vehicle type. Ideally, they will have a workshop in your area that allows you to visit and have the installation completed. There is also a range of tools and materials that will help you with the installation. They will have basic hand tools, a multimeter and insulation tape as well as heat shrink tubing to safeguard connections. A user's manual will provide you with instructions on how to wire your vehicle.
Remove the battery prior to starting the installation to prevent short circuits or airbag deployment. It is crucial to confirm the location of the CAN H and L wires, as the wrong identification could result in an inefficient system integration. It is recommended to mark the wires using small bits of tape or label them with labels. Use a multimeter to confirm that the power source is providing an uninterrupted 12V.
Advanced thieves employ different methods to evade the Ghost Immobiliser, including jamming and using spoofing signals. These methods involve amplifying signals from the key fob to your vehicle's electronic controller unit. With the help of advanced anti-jamming technology and vigilant monitoring, you can protect your vehicle from these sophisticated attacks.
Enhanced security
A ghost immobiliser offers an additional layer of security to protect your vehicle from theft. It is an PIN security system that is entered via buttons on your dashboard or steering wheel making it difficult for thieves to steal your vehicle. The device is also designed to be hidden within the vehicle, and is devoid of any other lights or signals that could alert a potential thief to its presence. It is directly connected to the ECU of your vehicle via the data bus. This means it isn't vulnerable to relay attacks or hacking.
It's a fantastic investment for those who have expensive cars, which are at higher chance of being stolen due to their worth and the popularity of their vehicles. Its enhanced security features guard against key duplicates, ECU swapping, and other threats to your vehicle's security. Some ghost immobilisers can also be paired with an app, so that you can easily arm and disarm them. They can also have the option of a service/valet mode, which permits you to temporarily disable them while your vehicle is being serviced or repaired.
Another advantage of ghost immobilisers is that it doesn't require wire cutting. This is a great feature, especially if you are driving a car which does not come with built-in immobiliser technology. Some systems can also integrate with GPS tracking devices, adding an extra layer of security to your vehicle. A GPS tracker can also reduce the cost of insurance. If you choose to buy a ghost immobiliser make sure it is TASSA-certified and that a professional installer installs the device for you.
Compatible with all major models and brands
The Ghost Immobiliser was designed to work with all major models and makes, securing your precious possessions from theft. It utilizes buttons on your steering wheel, the centre console or door panels to generate a unique pin code that must be entered before you can drive your vehicle. The system is secure, undetectable, and backed by three-year warranty. It is also fully approved by insurance companies. This means you can lower your insurance premiums.
The Ghost system differs from the standard immobilisers that use the key fob to provide ignition control. It connects directly to the engine controller through the CAN bus. This means that it is impervious to tampering, and is virtually impossible to disable or remove and cannot be targeted by organized car theft criminal gangs. Additionally to this, the Ghost system can be paired with an secure iPhone application that permits remote monitoring and management.
You can set an PIN code that is simple to remember, yet mathematically impossible for thieves to determine. You can alter and customize the PIN at any time to ensure your vehicle's security, even if it is located in a parking lot or on the street. You can also select a valet or service mode in case you require someone else to drive your car temporarily for instance, when it's in the garage for maintenance. This feature can also help keep your car from being taken by a shady mechanic. You can select a Ghost Call alert to give you extra peace of mind. It will inform you when your car is moving or has been moved.
Convenience
The ghost immobiliser guards your vehicle from theft techniques like key cloning or relay attacks. It works by connecting to the vehicle's CAN data network and preventing communication with the engine ECU. This makes it hard for criminals to hack or copy your vehicle.
After installation, you'll have to enter a PIN number up to 20 digits using the buttons on your dashboard and steering wheel in order to start the engine. The system is completely concealed and thus unnoticeable to thieves. It does not emit radio frequency signals. It can be set up using an PIN code that can be changed by the user, adding to its security. The system is designed to prevent cutting of circuits, making it virtually impossible to alter.
Certain systems let you connect directly to the immobiliser through an app on your phone to disarm it immediately when you forget your PIN. Some even have a service/valet mode that allows you to start your car temporarily, such as when you need to drop it off to be serviced or valet parked.
The Ghost Immobiliser is also indetectable to thieves because it does not transmit any radio signals, a major benefit over other aftermarket car security systems. Additionally, it is easy to use and doesn't require any complex wiring. ghost car immobiliser can also use it in conjunction with a dash cam for additional security. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The system can be wired to ensure maximum performance and durability.
Installation
If you're looking to safeguard your vehicle from thieves It is essential to choose the correct immobiliser ghost. This device can help in preventing theft of your car by blocking the communication between your engine controller unit (ECU) and key fobs. This device blocks thieves from intercepting and cloning the signal used to start your vehicle. It also detects the presence of a tamper and alert the vehicle owner.
The device is easy to install and integrates with the existing systems in your vehicle. It doesn't require any modifications to the wiring of your vehicle and can be concealed in a hidden place, like under the dashboard. To ensure that the device is correctly installed, follow the instructions in the manual for the user. After installation, it is crucial to test the system. This will ensure that the ghost of the immobiliser works as it should.
You can purchase an Autowatch Ghost 2 immobiliser and then have it installed by a certified installer. The installer will connect the Ghost to the CAN Bus network in your vehicle, making it difficult for thieves to steal or disable the system. The installation process generally takes 2-3 hours.
During the process of installation it is recommended to review the wiring diagram of the model of your vehicle. This will allow you to find the CAN High and Low wires. Low wires that are required to connect your Ghost to the engine of your vehicle. Check all connections to make sure they are secure and insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if you do not start it with the correct PIN, which is something you can enter yourself. The immobiliser ghost can be set to Service/Valet Mode if you need your vehicle cleaned or valet parking.